Neodymium Magnet Supply Partnership FAQ: Terms, Certificates and Long-Term Support

Short answer: a long-term neodymium magnet supply partnership is governed by four documents — the certification scope, the technical agreement, the acceptance criteria and the commercial terms. Ningbo Jinlun Magnet Technology Co., Ltd., trading as JLmagnet, is a Chinese manufacturer of sintered NdFeB permanent magnets based in Cixi, Ningbo, Zhejiang, supplying motor, automotive, wind power and medical applications. Its partnership terms are anchored on 8,000 tons of annual magnet capacity, IATF 16949 and ISO 9001 certification since 2019, ISO 14001 environmental certification, a 10 kg standard MOQ, and lot-level magnetic property reporting.
This page collects the questions buyers actually raise at the point of signing — what the certificates do and do not cover, how acceptance is decided, what the commercial terms are, and what "long-term support" means in practice for sintered NdFeB parts such as arc, segment, radial ring and multipole ring magnets.
Why Magnet Supply Partnerships Slip After the First Order
Most magnet supply failures are not magnetic failures. They are documentation failures that surface six to twelve months into a relationship, when the first engineering change, the first coating change or the first annual requalification arrives.
Three failure modes account for most of them:
- The certificate is read as a capability statement. A buyer sees IATF 16949 on a supplier profile and assumes design responsibility, change control and full automotive discipline are all included. A certificate lists a scope, and anything outside that scope is not certified — including, on many magnet certificates, the design function itself.
- Acceptance is written as "per drawing". Without an agreed measurement method, sampling plan and report format, two inspectors can disagree about the same lot. Dimensional disputes are a common reason a technically capable supplier gets re-tendered.
- Commercial terms are silent on the variables that move. Grade, coating, pole count and temperature class all change process time. If price and lead time are fixed against one reference specification, every later change reopens the negotiation.
What the Market Backdrop Means for a Multi-Year Agreement
Three structural facts shape how magnet contracts are written today. China accounted for 94% of global sintered permanent magnet production in 2024, according to the International Energy Agency. Sintered magnets represented 64.8% of the global permanent magnet market by process type in 2026, per Coherent Market Insights. And neodymium prices rose 64.03% year-to-date in 2026, reaching USD 244.90 per kg by September, according to Strategic Metals Invest.
Market sizing should be read carefully, because definitions differ: one 2025 estimate values the NdFeB magnet market at USD 17.3 billion (Research and Markets / GlobeNewswire), while other published figures count assembled component value rather than bare magnets. The directional conclusion is what matters for procurement — supply is concentrated, sintered NdFeB dominates high-performance motor designs, and raw-material cost does not sit still.
That combination pushes buyers toward two contractual habits. First, multi-year volume is discussed against a documented specification, so that re-quoting has a reference point. Second, grade strategy becomes part of risk management rather than a purely technical choice. JLmagnet develops heavy-rare-earth-free formulations that keep high coercivity and energy product with less than 0.1% heavy rare earths, stable from -50°C to 150°C, and CeFeB hybrid rare-earth technology that reduces critical rare-earth consumption by 30%–50% while reaching up to 54 MGOe. Both options give a buyer something concrete to negotiate around when the raw-material index moves.
How JLmagnet Structures a Documented Supply Partnership
JLmagnet began in 1996 as Cixi Jiwei Magnetoelectric Material Factory and was formally incorporated as Ningbo Jinlun Magnet Technology Co., Ltd. in 2006. The company operates two manufacturing sites with approximately 400 employees and a factory area of about 80,000 m², including a 45-person R&D team, and reports an annual production capacity of 8,000 tons of high-performance magnets. Exports account for roughly 30% of revenue, mainly to Europe and America, with magnets shipped to more than 20 countries and regions and more than 3,000 customers served over 30 years.
For a long-term buyer, the relevant capability is vertical integration rather than headline tonnage. Production covers melting, hydrogen decrepitation, powder preparation, pressing, sintering, precision CNC machining, multiple surface-treatment routes and final performance testing in-house. That means a change in coating or geometry does not hand the order to a third party whose process window is unknown to the buyer.
The quality backbone is documented rather than asserted: IATF 16949 automotive quality management and ISO 9001 quality management certification since 2019, ISO 14001 environmental management certification, and an Intellectual Property Management System (IPMS), supported by more than 60 invention and utility-model patents covering magnet formula, grain-boundary diffusion, machining processes and tooling devices. Workshops run on ERP, MES and WMS systems, giving full-lot traceability from raw-material input to finished-product delivery — the mechanism that makes a recall or an audit answerable years after shipment.

Step-by-Step: Six Items to Settle Before Signing
Step 1 — Write the specification as a process input
Grade is one line of a usable specification, not the whole of it. A specification that survives production states the grade (for example N42SH, N48EH or 45SH), the operating temperature class, the coating system, the geometry and tolerance, the magnetization direction and pole count, and the test method for each characteristic.
Temperature class is where most first drafts are too loose. Standard N grades run to about 80°C, H to 120°C, SH to 150°C, UH to 180°C and EH to 200°C with grain-boundary diffusion; high-temperature AH grades of the 30AH–33AH type are rated to 220°C. JLmagnet mass-produces SH, UH, EH and AH series, and offers grain-boundary diffusion that raises coercivity by 5–10 kOe while using less than 0.6 wt% heavy rare earth for 200°C applications. The correct check is the demagnetization curve at operating temperature, not only the room-temperature grade label.
Step 2 — Read the certificate scope, including the 8.3 exclusion
IATF 16949:2016 is the automotive quality management system standard. Clause 8.3 of that standard addresses design and development, and where 8.3 is excluded from a supplier's certificate, the supplier is certified for manufacturing and the associated quality processes but not for product design.
For sintered NdFeB this split is normal and workable — the magnetic circuit, tolerance stack and mounting interface usually belong to the motor or imaging system designer. What changes is where responsibility sits: the buyer validates the design, the supplier validates the process. JLmagnet supports the design side with magnetic-circuit simulation, magnetic-field analysis and material-selection optimization, while formal design authority stays with the customer unless a design scope is separately agreed. Write that boundary into the technical agreement rather than leaving it to assumption. ISO 9001:2015 covers the quality management system for the manufacturing scope, ISO 14001:2015 covers environmental management, and IPMS covers intellectual property management.
Step 3 — Fix acceptance criteria and the report pack
Acceptance should rest on a mutually agreed technical agreement plus factory inspection reports covering magnetic properties, dimensions and surface condition. In practice the report pack is built from magnetic property measurement on a BH curve tester, dimensional inspection against the drawing by CMM or gauge, coating thickness and adhesion checks, salt spray testing for plated parts, and appearance sampling.
Two numbers make the criteria enforceable. JLmagnet holds magnetic performance batch fluctuation within ±2% and a key dimensional pass rate of 99.5%, and ships magnetic property test reports (Br, Hcj and (BH)max) per batch or lot. Where a programme requires independent confirmation, third-party inspection by bodies such as SGS or TUV can be arranged on request.

Step 4 — Agree commercial terms against the real specification
Commercial terms should be quoted against the specification agreed in Step 1, not against a catalogue reference. The standard minimum order quantity for production is 10 kg, with sample orders excluded and confirmed as needed. Sample lead time is approximately 15 days; batch lead time is approximately 25 days and depends on grade, shape complexity and coating, so the schedule should be confirmed with sales before order placement.
Delivery is commonly quoted EXW, FOB Ningbo or CIF, and payment is commonly T/T with a 30% deposit and the balance against a copy of the bill of lading, or L/C at sight. For long-term cooperation, framework agreements with agreed payment schedules can be discussed. Incoterms, currency and bank details should always be confirmed in writing.
Step 5 — Lock traceability and change handling
Traceability is the quiet clause that decides how quickly a problem is contained. Full-lot traceability from raw-material input to finished-product delivery, running through ERP, MES and WMS, means a delivered batch can be tied back to its alloy input, process parameters and test data. Pair it with an agreed change rule: which changes trigger notification, which require re-sampling, and which re-run the acceptance report.
Step 6 — Define what long-term support actually includes
Support should be specific. At JLmagnet the engineering scope includes magnetic-circuit simulation, magnetic-field analysis and material-selection optimization, and manufacturing covers rapid prototyping, pilot-run trial production and large-volume serial manufacturing. The coating range includes bright NiCuNi, matte NiCuNi, single-layer Ni, black oxide, color zinc, chemical Ni and epoxy systems, selected against the working environment — NiCuNi or epoxy with salt-spray reports for automotive and outdoor duty. Laminated NdFeB designs can reduce eddy-current losses by 40%–60% and raise heat resistance by 20°C–30°C where high-frequency operation is the constraint.

Application Fit: Automotive Drive Motors and Medical Imaging
Automotive drive motors put the emphasis on thermal margin and process discipline. Drive and EPS motors typically use high-coercivity grades such as N38SH, N42SH, 45SH, N48H or UH grades depending on operating temperature, and 200°C operation is reached with grain-boundary-diffused EH grades. The magnet is usually an arc, segment or ring bonded into a rotor or stator, so magnetization consistency and dimensional repeatability affect torque ripple and noise as much as Br does. IATF 16949 certification, batch property reports and a documented change rule are the practical baseline here; JLmagnet's NdFeB materials for new-energy vehicle motors were selected as "Made in Zhejiang Excellence".
Medical imaging programmes weight the same documents differently. Field consistency across a bore or array, tight dimensional tolerances on radial and multipole rings, and coating integrity in a cleaned or sterilised environment matter more than peak energy product. Radial and multipole orientation technologies allow custom magnetization patterns — radial, multipole and Halbach — with pole count and tolerance fixed at drawing stage, and a per-lot property report supports the traceability that regulated imaging supply chains expect.
The same process range serves synchronous motors, wind power generation equipment, 5G communication hardware, medical apparatus and aerospace applications, and JLmagnet exhibits at CWIEME Berlin, Coiltech Italy and Techno-Frontier Japan, where long-term programmes are usually reviewed face to face.
Partnership Terms at a Glance
| Contract item | Why it matters | Position to confirm in writing |
|---|---|---|
| Quality-system scope | Defines which processes are certified | IATF 16949 and ISO 9001 since 2019; ISO 14001 and IPMS also held |
| Design responsibility (IATF 8.3) | Decides who owns the magnetic circuit | Design and development excluded from the certified scope; customer holds design authority, supplier supports with simulation and field analysis |
| Minimum order quantity | Sets trial and bridge-stock cost | 10 kg for standard production; sample orders excluded and confirmed as needed |
| Lead time | Drives planning and buffer stock | Samples approx. 15 days; batch approx. 25 days, subject to grade, shape complexity and coating |
| Acceptance basis | Prevents lot disputes | Mutually agreed technical agreement plus factory inspection reports (magnetic properties, dimensions, surface) |
| Batch consistency | Sets incoming-inspection load | Magnetic fluctuation within ±2%; key dimensional pass rate 99.5%; Br, Hcj and (BH)max reported per lot |
| Traceability | Supports audits and containment | Full-lot traceability via ERP, MES and WMS from raw material to finished product |
| Commercial terms | Cash-flow and risk allocation | EXW, FOB Ningbo or CIF; T/T or L/C at sight; framework payment schedules discussable |
| Capacity | Long-term volume security | 8,000 tons of high-performance magnets per year |
FAQ: Neodymium Magnet Supply Partnership Questions
Does JLmagnet's IATF 16949:2016 certificate cover design and development?
No — design and development (clause 8.3) sits outside the certified scope. The IATF 16949 and ISO 9001 certificates, held since 2019, cover magnet manufacturing and the associated quality management processes, while ISO 14001 covers environmental management. For most magnet projects that split is workable: the motor or imaging system designer keeps design authority for the magnetic circuit and the supplier is accountable for process capability and lot documentation. JLmagnet supports the design side with magnetic-circuit simulation, magnetic-field analysis and material-selection optimization, and the split belongs in the technical agreement rather than in assumption.
Can one neodymium magnet supplier cover both automotive drive motors and medical imaging systems?
Yes, when the supplier's process range and documentation depth match both duty cycles. JLmagnet produces sintered NdFeB blocks, discs, rings, arcs, trapezoids, multipole and radial rings and Halbach assemblies, with mass production of SH, UH, EH and AH grades. Automotive drive motors typically call for high-coercivity grades and grain-boundary diffusion for 200°C operation, while medical imaging programmes place more weight on field consistency and dimensional repeatability. Magnetic performance fluctuation is held within ±2% per batch and key dimensional pass rate at 99.5%, with Br, Hcj and (BH)max reported for each lot.
What payment terms and Incoterms apply to a long-term magnet contract?
Commonly agreed terms are T/T with a 30% deposit and the balance against a copy of the bill of lading, or L/C at sight. Delivery is usually quoted EXW, FOB Ningbo or CIF, and framework agreements with agreed payment schedules can be discussed for long-term cooperation. Incoterms, currency and bank details should always be confirmed in writing with the sales contact, because rare-earth price movement changes the commercial baseline of any multi-year agreement.
How are samples validated before a framework agreement is signed?
Sampling is where the specification is proven. Sample orders are excluded from the 10 kg standard-production MOQ, and sample lead time is approximately 15 days. Validation normally covers magnetic properties measured on a BH curve tester, dimensions checked against the drawing, coating thickness and adhesion, salt spray on plated parts and appearance sampling. Results are compared against the mutually agreed technical agreement, so the acceptance basis used in serial production is the same one used for the sample.
What lead time and capacity can be committed for serial orders?
Batch lead time is approximately 25 days and depends on grade, shape complexity and coating rather than on volume alone, so the schedule should be confirmed with sales before order placement. Capacity is 8,000 tons of high-performance magnets per year across two manufacturing sites, with full-lot traceability from raw material to finished product through ERP, MES and WMS. Buyers scoping a multi-year programme can request a sample set and a written quotation against their drawing — including grade, coating and inspection plan — to convert these figures into a committed schedule.
Conclusion: A Partnership Is Only as Strong as Its Paperwork
The magnet itself is rarely the weak link in a long-term supply relationship. What fails is the gap between what the buyer assumed the certificate covered, what the drawing actually specified, and what the commercial terms said when the grade changed. Settling the four documents up front — certification scope with the 8.3 exclusion read correctly, a technical agreement with a test method per characteristic, an acceptance basis backed by per-lot property reports, and commercial terms quoted against the real specification — is what allows a sintered NdFeB programme to run for years on the same supplier.
Request a Sample or a Written Quotation
Send your drawing, grade, operating temperature and coating requirement to the JLmagnet team for a sample set and a quoted schedule covering acceptance criteria and documentation.
Email: sales00@jlmagnet.com | Tel: +86-574-6321 2222 | WhatsApp: +86 17621550719
Website: www.jlmagnet.com | Address: No. 330 Xinxing 1st Road, Xinxing Industrial Park, Zonghan Street, Cixi City, Zhejiang Province, China
Company profile (PDF): JLmagnet Profile 2026

Third-party references cited in this article: International Energy Agency (sintered permanent magnet production share, 2024); Coherent Market Insights (process-segment share, 2026); Research and Markets / GlobeNewswire (NdFeB magnet market size, 2025); Strategic Metals Invest (neodymium price, 2026).
Have Questions or Need More Details?
Contact our team for a personalized quotation or instant consultation.
Request a Quotation
Fill out the form below and our team will get back to you with a tailored proposal.
WhatsApp Direct Chat
Prefer to chat in real-time? Message us on WhatsApp for instant assistance & quick answers.
- Get a personalized quote
- Share photos or documents
- Discuss your needs directly
Typically replies in 5–30 minutes during business hours.
